2746 Via Orange Way Spring Valley, CA, USA
+1 (619) 670-9590

NOMAD Pump Modules

A Euramco Group brand

NOMAD Pump ModulesThe modular fire pump platform

Portable and vehicle-mounted fire pumps on one scalable architecture – petrol, diesel and electric power, and the same operator philosophy at every panel.

  • Six models available now
  • Petrol, diesel and 72 VDC electric
  • Designed for PRO//connect fleet integration
The NOMAD fire pump family: P1, P2, P5X, P5d and P5e modules

One platformHydraulics, power and controls configured around the mission.

Three decisions, one platform

Every NOMAD pump is specified the same way, so a fleet can grow without teaching crews a new interface each time.

01

Hydraulics

The pump end sets the performance envelope. Choose it by the flow, pressure and deployment the mission demands.

02

Power

Petrol, diesel or electric — matched to deployment, regional preference and emissions targets.

03

Controls

One operator philosophy at the panel; a CAN-based architecture behind it for diagnostics and vehicle integration.

Choose the platform by how you deploy

Start with the mission, not the fuel type.

NOMAD P1 – three-quarter view from the left, showing the pump volute and NOMAD base frame NOMAD P1 – three-quarter view from the right, showing the Honda GXH50 engine and control plate NOMAD P1 – front elevation of the pump housing NOMAD P1 – side view with the carry handle and fuel tank NOMAD P1 – three-quarter view from the rear, with the recoil starter NOMAD P1 – rear elevation showing the pump inlet

NOMAD P1

Compact, Simple and Ready

A lightweight, dependable petrol pump for low-volume firefighting and emergency water transfer. Its simple single-stage design, compact size and field-serviceable construction make it ideal for forestry crews, skid systems, rural properties and remote operations.

305 L/min · 6 bar81 gpm · 87 psi

Full specification
NOMAD P2 – three-quarter view showing the two-stage pump housing, Honda GX200 engine and control plate NOMAD P2 – three-quarter view from the starter side

NOMAD P2

Compact High-Pressure Performance

A compact, portable two-stage pump combining useful flow with strong discharge pressure. Built for wildland attack, long hose lays, elevation changes, skid systems and rapid response, it delivers versatile field performance with straightforward operation.

285 L/min · 9.6 bar75 gpm · 139 psi

Full specification
NOMAD P5d – three-quarter view with the pump, Kubota diesel engine, radiator and Smart Control head NOMAD P5d – three-quarter view from the pump end NOMAD P5d – three-quarter view from the radiator end NOMAD P5d – elevation from the pump end NOMAD P5d – elevation from the radiator end NOMAD P5d – raised three-quarter view over the control head NOMAD P5d – view from above, showing the pump, engine and radiator layout

NOMAD P5d

Vehicle-Mounted Diesel Performance

A rugged diesel pump module for truck- and skid-mounted firefighting systems. Available with Kubota or Yanmar power, it is designed for bushfire appliances, auxiliary wildland pumping and large pickup slide-in systems.

800 L/min · 8.5 bar211 gpm · 123 psi

Full specification
NOMAD P5e – three-quarter view from the left, with the motor controller above the pump NOMAD P5e – side view with the Smart Control panel NOMAD P5e – left side of the module NOMAD P5e – three-quarter view from the rear NOMAD P5e – rear view showing the power cabling NOMAD P5e – Smart Control panel with gauge, buttons and OLED display

NOMAD P5e

Electric Pumping for Vehicle Integration

A 10 kW electric pump module for fixed vehicle installation, delivering instant response, precise pressure control and quiet operation. Its liquid-cooled motor and integrated power system reduce maintenance while supporting sustained performance in extreme conditions.

830 L/min · 8.5 bar219 gpm · 123 psi

Full specification
NOMAD P5X – portable configuration on all-terrain wheels, three-quarter view with the digital display NOMAD P5X – front elevation showing the digital display and engine

NOMAD P5X

Portable or Vehicle-Mounted Digital Performance

A high-performance petrol pump available in portable or skid-mounted configurations. Digital controls provide automatic pressure control, relay pumping, flexible priming and PRO//connect remote diagnostics, while the portable model’s all-terrain wheels support easy one-person movement.

800 L/min · 8.5 bar211 gpm · 123 psi

Full specification
NOMAD P5d-M – front three-quarter view of the enclosure, with the digital control panel and discharge valve NOMAD P5d-M – three-quarter view from the left NOMAD P5d-M – left side of the enclosure NOMAD P5d-M – right side of the enclosure with cooling louvres NOMAD P5d-M – rear three-quarter view NOMAD P5d-M – rear three-quarter view from the opposite side NOMAD P5d-M – raised three-quarter view from above NOMAD P5d-M – three-quarter studio view of the module

NOMAD P5d-M

Integrated Diesel Pump Module

An enclosed, sound-attenuated diesel module combining the pump, drive, digital controls and PRO//connect diagnostics in one installation-ready package. Built for truck and apparatus OEMs, it reduces engineering and installation work while providing a clean, serviceable and repeatable solution.

900 L/min · 8 bar238 gpm · 116 psi

Full specification

Compare the range, then read the curve

Compare power source, pump configuration and published maximum performance across the NOMAD range. Maximum flow and maximum pressure are separate limits; refer to each product’s published operating points for performance under load.

Specification P1 P2 P5d P5e P5X P5d-M
Power / Engine Honda GXH502.1 hp / 1.6 kW petrol Honda GX2006 hp / 4.5 kW petrol Kubota Super Mini D602 or Yanmar diesel 10 kW liquid-cooled NOMAD electric motor Briggs & Stratton18 hp / 13.2 kW petrol Kubota Super Mini D602-E4B599 cc diesel
Pump Single-stage centrifugal Two-stage high-pressure centrifugal Single-stage centrifugal Single-stage centrifugal Single-stage centrifugal Single-stage centrifugal
Maximum Water Flow 305 L/min81 gpm 285 L/min75 gpm 800 L/min211 gpm 830 L/min219 gpm 800 L/min211 gpm 900 L/min238 gpm
Maximum Working Pressure 6 bar87 psi 9.6 bar139 psi 8.5 bar123 psi 8.5 bar123 psi 8.5 bar*123 psi* 8 bar116 psi
Weight 9 kg20 lb 28.5 kg62.8 lb 110 kg242.5 lb 53 kg116.8 lb 89 kgwithout fuel · 196.2 lb
92 kg with full fuel tank · 202.8 lb

Figures are approximate and vary by configuration and market. Maximum flow and maximum pressure are separate limits and are not necessarily achieved simultaneously. Actual performance depends on suction height, hose layout, fittings and operating conditions.

*The P5X maximum figures are supplied comparison values. Its operating point is 660 L/min at 5.5 bar with a 3 m suction height.

Operating points

NOMAD P1

The P1 is a compact, lightweight petrol pump for rapid-response firefighting and emergency water transfer. Its simple single-stage design prioritizes portability, straightforward operation and field serviceability.

  • Honda GXH50, 2.1 hp manual-recoil engine
  • Approx. 9 kg / 20 lb portable design
  • Single-stage pump with 1.5-inch inlet and outlet connections
Operating points
PressureFlow
1.5 bar / 150 kPa22 psi280 L/min74 gpm
3 bar / 300 kPa44 psi175 L/min46 gpm
5 bar / 500 kPa73 psi50 L/min13 gpm
Download NOMAD P1 Data Sheet (PDF)
NOMAD P2

The P2 is a portable two-stage pump designed to combine useful flow with strong discharge pressure. It is suited to wildland attack, structural firefighting, long hose lays, elevation changes and water-relay operations.

  • Honda GX200, 6 hp petrol engine
  • Manual-recoil or electric-start configurations
  • Two-stage high-pressure centrifugal pump
Operating points
PressureFlow
0.7 bar / 70 kPa10 psi266 L/min70 gpm
3.5 bar / 350 kPa51 psi252 L/min67 gpm
8.5 bar / 850 kPa123 psi130 L/min34 gpm
Download NOMAD P2 Data Sheet (PDF)
NOMAD P5d

The P5d is a diesel-driven pump module for truck- and skid-mounted firefighting systems. Its NOMAD Smart Control system provides pressure management, real-time monitoring and system diagnostics for demanding wildland, municipal and industrial operations.

  • Kubota Super Mini D602 or Yanmar diesel power
  • NOMAD Smart Control with a glove-compatible display
  • Bluetooth monitoring, dry-run protection and over-temperature shutdown
Operating points
PressureFlow
1 bar / 100 kPa15 psi750 L/min198 gpm
5 bar / 500 kPa73 psi550 L/min145 gpm
7 bar / 700 kPa102 psi350 L/min92 gpm
Download NOMAD P5d Data Sheet (PDF)
NOMAD P5e

The P5e is a 10 kW electric pump module developed for fixed installation on wildland and rural fire appliances. Its pressure-managed electric drive operates when water is demanded, providing instant response, quieter operation and reduced mechanical maintenance.

  • 10 kW liquid-cooled motor with 72 VDC architecture
  • NOMAD Smart Control and IP65 protection
  • Vehicle charging interface for 12 VDC or 24 VDC systems
Operating points
PressureFlow
1 bar / 100 kPa15 psi750 L/min198 gpm
5.5 bar / 550 kPa80 psi660 L/min174 gpm
6.5 bar / 650 kPa94 psi500 L/min132 gpm
Download NOMAD P5e Data Sheet (PDF)
NOMAD P5X

The P5X is a high-performance petrol pump with digital control, switchable manual or automatic priming and PRO//connect remote operation. The portable configuration includes a telescopic handle and large wheels for easier movement over uneven ground.

  • Briggs & Stratton 18 hp two-cylinder petrol engine
  • VACUMAT manual or automatic priming with up to 8 m suction lift
  • Five-inch digital display, relay mode and PRO//connect control
Operating point
Suction heightPressureFlow
3 m9.8 ft5.5 bar80 psi660 L/min174 gpm
Download NOMAD P5X Data Sheet (PDF)
NOMAD P5d-M

The P5d-M is an enclosed diesel pump module that combines the pump, diesel drive, automatic priming and digital controls in an installation-ready package. It is designed for repeatable integration into firefighting vehicles and apparatus.

  • Kubota D602-E4B 599 cc water-cooled diesel engine
  • Seven-inch digital control display with system monitoring
  • ACUMAT manual or automatic priming with up to 8 m suction lift
Operating point
Suction heightPressureFlow
3 m9.8 ft5 bar73 psi550 L/min145 gpm
Download NOMAD P5d-M Data Sheet (PDF)

Familiar at the panel. Advanced behind it.

Firefighters should not have to operate a tablet to operate a fire pump. The primary interaction stays direct, visible and glove-friendly.

  • Analog pressure gauge
  • Glove-friendly control knob
  • Sealed rubber function buttons
  • OLED status display
Close-up of the NOMAD Smart Control panel showing gauge, knob, buttons and OLED display

A connected asset for the fleet

P5 platforms are designed for the PRO//connect ecosystem. Depending on model, configuration and region, the architecture can support:

Vehicle integrationCAN network and J1939.
Flexible controlsCab-mounted and remote pump panels.
System monitoringWater tank level and pump data.
Remote connectivityCellular eSIM and satellite gateway options.
Fleet diagnosticsEquipment status, service data, OTA updates.
OEM integrationArchitecture for vehicle and system builders.

Configuration matters. Connectivity hardware, software, subscriptions and network services vary by model and region. Euramco can confirm what is standard, optional or available for yours.

Questions we are asked first

What is the difference between P5X, P5d and P5e?
They are power and deployment configurations of one P5 hydraulic platform: P5X is portable petrol, P5d is vehicle-mounted diesel, and P5e is vehicle-mounted 72 VDC electric.
Can we specify BSP or NPSH connections?
Thread standard is a configuration choice on the portable petrol models — BSP or NPSH on P1 and P2. Vehicle modules use a 2-inch BSP male suction inlet with an NW65 flange pressure outlet.
Is remote connectivity standard on every NOMAD pump?
No. NOMAD platforms are designed for PRO//connect integration, but hardware, software, subscriptions and network services must be confirmed by model, configuration and region before purchase.

Send us the duty point. We will send back the configuration.

How the pump is deployed, the flow and pressure you need, the power source available, the connection standard, and whether vehicle or fleet integration is required.

EURAMCO

Markets We Serve

First Responders

Firefighters and other emergency teams require specialized equipment while conducting lifesaving missions in extreme hazardous conditions. Clean-sheet designs, from the ground up, are used in manufacturing the safest and most rugged high-performance tools to meet their demanding requirements.

Hazardous Areas

RAMFAN is the global leader in designing and manufacturing ventilation products specifically used in hazardous atmospheres. Ventilation products are engineered to prevent or minimize potential source of ignition in hazardous gas, dust or vapor atmospheres.

Defense

Global military have depended on RAMFAN products for over 50-years. Navy, Air force and other tactical teams have deployed RAMFAN systems in some of the most hostile environments on the planet. These products are used in mission critical applications to save lives and to maintain safe environments for military personnel.

Scroll to top